Wieso zeigt Versiegelung nicht die optimale Wirkung / Warum ist die Wirkung nicht vorhanden? / Wieso ist der Effekt der Langzeitwirkung nicht gegeben?

1. Die Versiegelung kann in ihrer Wirkung beeinträchtigt sein, wenn während der Applikation oder Trocknungsphase (etwa 24 Stunden) Feuchtigkeit (z.B. Regen oder aufsteigende Feuchtigkeit aus dem Boden) auftritt. 2. Eine nicht vollständig rückstandsfreie Vorreinigung kann ebenfalls zu Problemen führen. Es ist essenziell, dass Steinreiniger oder andere Vorreiniger vollständig entfernt werden. 3. Eventuelle Vorbeschichtungen können das optimale Einziehen und Abbinden der Versiegelung verhindern, was zu einer reduzierten oder nicht langanhaltenden Wirkung führen kann.

Kann ich die Steine mit einem Hochdruckreiniger (Kärchern) reinigen?

Empfehlung: 1. Wir raten generell von der Nutzung eines Hochdruckreinigers für die Reinigung von Stein- und Betonplatten ab. Durch die starke Abrasion werden die Oberflächen beschädigt und anfälliger für erneute Verschmutzung und Algenbewuchs. 2. Die fräsende Wirkung des Hochdruckreinigers kann die oberste Schicht einer Versiegelung abtragen, selbst wenn die Hydrophobie in den tieferen Schichten erhalten bleibt.

Warum hält meine Versiegelung nicht so lange wie erwartet?

Die Haltbarkeit der Versiegelung kann durch verschiedene Faktoren beeinflusst werden. Mögliche Probleme während der Aufbringung, wie Feuchtigkeitseinwirkung während der Trocknungsphase oder eine unzureichende Vorreinigung, können die optimale Wirkung beeinträchtigen. Zudem kann eine starke Beanspruchung der Oberfläche die Lebensdauer der Versiegelung verkürzen. Es ist jedoch möglich, dass die Tiefenwirkung in den darunter liegenden Schichten weiterhin vorhanden ist.

Warum tritt der gewünschte Abperleffekt nicht ein?

Der fehlende Abperleffekt könnte auf Probleme bei der Aufbringung der Versiegelung zurückzuführen sein. Feuchtigkeit während der Applikation oder eine nicht vollständig entfernte Vorreinigung können die Wirkung beeinträchtigen und verhindern, dass die Versiegelung optimal einzieht und abbinden kann.

Stone sealing with long-term and deep effect

For all mineral stone surfaces indoors and outdoors

✓ Water-repellent & abrasion-resistant nano-coating

✓ Easy-to-clean effect: dirt does not stick and can be easily removed

✓ Absolutely invisible: No change in the look and feel of the surface

✓ Surface remains breathable

✓ Prevents the growth of moss, lichen, fungi and the formation of green growth

Is often bought together

Product picture BIOSATIVA @. Sustainable cleaning agent on a biological basis. 100% natural and 100% organic.

Total price: 1.334,67€

This Product: Stone sealing with long-term and deep effect Container size: 20l canister - 1.299,00€
Application set 1 - 13 pieces - 9,99€
Yellow nitrile work gloves with knitted cuffs - 2,69€
BIOSATIVA® - Bio Cleaner - Concentrate for up to 100l ready-to-use solution Container size: 1l bottle - 22,99€

79,99€ (79,99€ / l)

SKU: 3000-7620

Content: 1 l

Inventory : In stock

Delivery time: 3 working days

incl. VAT plus Shipping

Container size

Clear

Quantity:

Description

Our stone sealing with a long-term and deep effect protects stone surfaces of various types effectively and permanently against the weather, dirt and water, without impairing the look and feel of the surface. Highly effective, water-repellent, abrasion-resistant nano-coating for all absorbent mineral stone surfaces.

New version with improved effectiveness against fat and red wine (formerly item number 3000-620)

High quality made in Germany.

product video

Product features

✓ Effective permanent surface protection against water, dirt and weathering

✓ Ready-to-use, highly concentrated, high-performance silane/SI-based impregnating agent

✓ Prevents the growth of moss, lichen, fungi and other natural influences

✓ Simple processing

✓ No change in the look and feel of the surface (absolutely invisible)

✓ Slight color deepening effect on very absorbent surfaces or intensive application

✓ Absolutely frost-resistant (ice and snow do not cause any damage)

✓ Extreme abrasion resistance due to long-chain silicon compounds (SiO²)

✓ Long-lasting depth effect through high penetration depths of up to 20mm (depending on absorbency)

✓ The surface remains breathable (open to diffusion), so there is no barrier layer and no waterlogging

✓ Saltwater, freeze & alkali resistant

✓ No formation of sticky silicone films thanks to SiO2 technology

✓ Suitable for indoor and outdoor applications

✓ High UV stability

✓ Easy-to-clean effect: dirt does not adhere and can be easily removed

✓ Properly applied, durable for many years as the sealant forms a covalent (permanent) bond with the surface – long-term protection (up to 10+ years)

✓ Reduces the tendency to efflorescence (on concrete and calcareous rock)

✓ Highly water, oil and dirt repellent

✓ Recommended application temperature +5 to +25°C

✓ Contributes significantly to energy savings in buildings, as dry surfaces
are thermally efficient

Scope of delivery:
1 x liter bottle
1 x pump spray head

Application

Suitable for all mineral, absorbent, open-pored stone surfaces, indoors and outdoors.

✓ natural stone (approx. 10-30m² / liter)

✓ Concrete block (approx. 10-30m² / liter)

✓ paving stone (approx. 10-30m² / liter)

✓ Cobblestone pavement (approx. 10-30m² / liter)

✓ Brick & masonry (approx. 20-30m² / liter)

✓ Stone tiles (unglazed) (approx. 20-40m² / liter)

✓ Roof tiles (approx. 15-25m² / liter)

✓ Limestone (approx. 15-25m² / liter)

✓ Lime sandstone (approx. 15m² / liter)

✓ sandstone (approx. 8-15m² / liter)

✓ slate (approx. 15-30m² / liter, attention: slate gets darker color (deepening of color)

V24 stone sealant is delivered ready to use and is applied undiluted to the pre-cleaned and dried surface.

All surfaces to be treated must be dry and well cleaned, as this is the only way to ensure a deep penetration of the sealant, which has an optimal long-term and deep effect.

After application, the V24 stone sealing remain in contact with the surface as a film of liquid for several seconds.

The coating is completely crosslinked and cured after 24 hours.

A detailed application description can be found in our data sheet

FAQ

Why does sealing not have the optimum effect / Why is there no effect? / Why is there no long-term effect?

1. The effectiveness of the sealer may be impaired if moisture (e.g. rain or rising damp from the floor) occurs during the application or drying phase (approx. 24 hours).
2. Pre-cleaning that is not completely residue-free can also lead to problems. It is essential that stone cleaners or other pre-cleaners are completely removed.
3. Any pre-coatings can prevent the sealant from being optimally absorbed and set, which can lead to a reduced or non-long-lasting effect.

Can I clean the stones with a high-pressure cleaner?

Recommendation:
1. We generally advise against using a pressure washer for cleaning stone and concrete slabs. The heavy abrasion damages the surfaces and makes them more susceptible to re-soiling and algae growth.
2. The abrasive action of the pressure washer can remove the top layer of a sealant, even if the hydrophobicity in the deeper layers remains intact.

Why doesn’t my sealant last as long as expected?

The durability of the sealant can be influenced by various factors. Possible problems during application, such as exposure to moisture during the drying phase or inadequate pre-cleaning, can impair the optimum effect. In addition, heavy use of the surface can shorten the service life of the sealant. However, it is possible that the depth effect is still present in the underlying layers.

Why does the desired beading effect not occur?

The lack of beading effect could be due to problems with the application of the sealant. Moisture during application or incompletely removed pre-cleaning can impair the effect and prevent the sealant from being optimally absorbed and setting.