Ceramic sealing for the highest demands in industry
High-tech professional coating for metal, plastic, powder-coated and painted surfaces with exceptional resistance to corrosion, abrasion and temperature. Particularly suitable for industrial applications with the highest demands, as well as the marine, military and aviation sectors (aircraft industry).
This sealer is an absolute professional product that should not be used without practice, as the setting times are very short. On the other hand, the product impresses with its unbeatable durability and hardness.
![Rolls of metal sheet. Zinc, aluminum or steel sheet rolls on warehouse in factory.](https://www.versiegelung24.com/wp-content/plugins/wp-fastest-cache-premium/pro/images/blank.gif)
Product features
- clear, colorless liquid based on silanes, contains solvents, no water
- Creates an invisible protective layer (depending on the material, the surface may become a little shiny
- Extremely abrasion-resistant coating with very high non-stick properties
- Corrosion resistant
- High impact resistance
- Especially suitable for water- and dirt-repellent sealing of non-absorbent materials in exterior and interior areas
- Resistant to seawater and salty air
- Supplied ready for use
- Very reactive and resistant to a large number of different organic solvents
- “Easy-to-clean” effect, surfaces stay clean longer and are much easier to clean, thus extending cleaning intervals and reducing cleaning and maintenance costs
- Can be sprayed on or applied by hand with a cloth, application possible using a polishing machine
- Surface becomes extremely shiny through polishing
- Highly effective coating for up to 25 years
- Food safe
- Material use car approx. 50ml (larger SUV approx. 100ml)
- Application temperature: +5°C to +35°C
- Yield 50-130m² per liter depending on surface structure
- Temperature resistance: -90 to +750°C
- Shelf life of the liquid: 24 months in the original bottle, 6-12 months after opening.
- Storage temperature: +5°C to +20°C
- Curing time: 5-7 days at 20°C, 1 day at 60°C (surface usable after 2 hours), 2 hours at 200°C
- Heat drying increases the degree of hardness of the sealant, which ranges from 7H (drying at room temperature) to 9H (heat drying)
Oxidation and corrosion resistance
Bare metal oxidizes over time, as do painted surfaces. V24 Permanent Protector 640 protects the paint and the metal from contact with water and air and is therefore corrosion protection.
High resistance to chemicals
The ceramic sealant is almost 100% resistant to most chemicals/solvents in use.
![Car bodies are on assembly line. Factory for production of cars. Modern automotive industry. Top of](https://www.versiegelung24.com/wp-content/plugins/wp-fastest-cache-premium/pro/images/blank.gif)
Product application
V24 Permanent Protector 640 is of great benefit in a wide range of commercial applications:
- Military (ships, planes, tanks, …)
- Steel industry (bridges, steel structures, equipment and machinery, …)
- Oil industry (pipelines, rigs/platforms, connectors, …)
- Boat and ship building
- Automotive industry (engine construction, car body construction, surface protection, …)
- Train and railroad industry (engine construction, rails, surface protection, …)
- Aircraft industry (turbines, wings, surface protection, …)
- and much more…
V24 Permanent Protector 640 can be used on the following metals:
- ferrous metals (steel)
- non-ferrous metals
- galvanized (zinc plated) metals
- painted surfaces
- powder coated surfaces
V24 Permanent Protector 640 can also be used for vehicle refinement: car paint, rims, headlights, windows, plastic surfaces.
V24 Permanent Protector 640 Application procedure
- The product can be applied by spraying or wiping.
- We recommend the use of an airless spraying system for spray application. Application by wiping should be carried out with an application/microfiber cloth.
- Always carry out a test application on a test area before applying to the surface. This also allows the yield on the respective substrate to be determined.
- Pre-cleaning: The surfaces must be dry, clean and free of any residues (waxes, silicones, pre-coatings, grease, etc.).
- Application: Apply V24 Permanent Protector until a thin layer is visible
- Drying time: The surface is dry and ready for use after 2-5 hours (depending on weather conditions)
- Curing time: 5-7 days at 20°C, 1 day at 60°C (surface usable after 2 hours), 2 hours at 200°C
- Caution: This is a high-tech product that only provides the desired result when used properly.
For use on car paint, please observe the special application instructions in the corresponding product data sheet!
Functionality
Our ceramic sealant V24 Permanent Protector 640 reacts with the surface of the material and forms an abrasion-resistant covalent (permanent) coating with very strong adhesive properties.
An ultra-thin, transparent coating with high impact resistance is formed. V24 Permanent Protector 640 is extremely resistant to alkalis, corrosion, seawater and abrasion.
![blank](https://www.versiegelung24.com/wp-content/plugins/wp-fastest-cache-premium/pro/images/blank.gif)
Cured at 80°C
Test period: 3-4 weeks outdoor weathering
![blank](https://www.versiegelung24.com/wp-content/plugins/wp-fastest-cache-premium/pro/images/blank.gif)
Test period: 3 years of outdoor weathering
![blank](https://www.versiegelung24.com/wp-content/plugins/wp-fastest-cache-premium/pro/images/blank.gif)
Cured at more than 80°C
Product Safety & Storage
Information on the classification of the product within the framework of the Ordinance on Hazardous Substances, safety data and data on toxicology and storage can be found in our safety data sheet.
Permanent Protector 640
- must not come into contact with moisture.
- Storage temperature of the material: < 20°C.
Permanent Protector 640 has a shelf life of 12 months when stored in the original sealed containers.
A longer storage period does not necessarily mean that the product is unusable, however, in terms of quality assurance, the properties desired for the intended use should be checked.
FAQ
The high-performance 9H ceramic sealant is a glass coating based on silanes. It is so thin and invisible to the naked eye that it has no effect on the appearance or surface texture. High-performance 9H ceramic sealant is not a paint, wax or sealant and cannot peel or wash off.
The ceramic sealant forms a permanent (“covalent”) bond with the surface and can only be removed by grinding. Chemicals cannot dissolve the ceramic sealant. However, it is preserved permanently only with proper care. The service life depends on the influences to which the surface is exposed.
To describe the hardness of a coating, we use the well-known “pencil hardness”. The measuring range is between 6B (softest) and 9H (hardest). The V24 Permanent Protector 640 achieves a hardness level of 8H (drying at room temperature) to 9H (heat drying).
Permanent Protector 640 HIGH-PERFORMANCE – 9H ceramic sealant for industrial applications | Permanent Protector 7640 HIGH-END – 9H ceramic sealant | Permanent Protector 7650 PRO EASY ON – 9H ceramic sealant (new) | |
---|---|---|---|
Item number | 8000-640 | 8000-7640 | 8050-7650 |
Application | ultra professional/industrial application | Professional application | professional application with easy handling |
Application temperature | +5°C to 35°C | +5°C to 35°C | +5°C to 35°C |
Durability | Up to 25 years | Up to 72 months | Up to 60 months |
Curing time | 5-7 days at 20°C, 1 day at 60°C (surface usable after 2 hours), 2 hours at 200°C | 7 days at 20°C (surface usable after 5 hours) | 7 days at 20°C, 1 day at 60°C (usable after 2 hours) |
Pearl effect | high | high | high |
Gloss effect | high | high | high |
Scratch resistance | +++++ | + + + + | + + + + |
fertility | approx. 5-13 ml/m² | approx. 10 ml/m² | approx. 5-10 ml/m² |
Consistency | Liquid, solvent-based | Liquid, solvent-based | Liquid, solvent-based |
Frost resistant | Yes | Yes | Yes |
UV-resistant | Yes | Yes | Yes |