Ceramic sealant: The most common mistakes
An improperly applied ceramic sealant can cause more problems than benefits. In this article, you will find out what the most common mistakes are when applying a ceramic sealant and how to avoid them.
Table of contents
Lack of preparation before application
A common mistake when applying sealants, especially ceramic sealants, is inadequate surface preparation. Before applying a sealant, the paintwork should be thoroughly cleaned and polished. Dirt, dust and other impurities can impair the result and reduce the durability of the sealant. Make sure the surface is dust-free and completely clean to achieve a smooth and flawless finish.
Insufficient coverage during application
Another common mistake is applying the sealer unevenly. It is important to apply the sealer evenly and in a thin layer to ensure that all areas are covered. Layers that are applied too thickly can cause bubbles and irregularities. In addition, this often leads to a longer drying time and can impair the protective effect.
Do not repair scratches and damage
Before applying a ceramic sealant, all scratches and damage to the paintwork should be repaired. Small scratches and damage are more difficult to repair after sealing and can affect the appearance and functionality of the protective coating. Polish the surface thoroughly to prevent micro-scratches and other irregularities in the paintwork.
Incorrect care products after sealing
After applying a ceramic sealant, it is crucial to use the right care products. Aggressive cleaning agents or unsuitable care products can damage the seal and shorten its durability. Use special cleaning agents that are suitable for sealed surfaces and avoid the use of harsh chemicals and abrasive materials that could wear or damage the protective layer.
Drying time too short
One of the most common mistakes when applying sealers is not giving the coating enough time to cure. The curing time varies depending on the product, but generally the sealer should dry for at least 24 hours. Insufficient drying time can impair the protective effect and cause the sealant to wear off or become damaged more quickly. Allow the ceramic sealant sufficient time to dry and avoid using or washing the vehicle during this time. Important: Always observe and read the respective data sheet and the application method to achieve the maximum protective effect.
Permanent Protector 7650 PRO EASY ON - 9H ceramic sealant
First ultra-modern ceramic coating with Easy On effect
✓ Durability of up to 6 years
✓ Also offers high-quality corrosion protection
✓ Easy to use
Protection against stone chipping and environmental influences
The ceramic sealant provides an effective protective layer against stone chips and other mechanical impacts. Thanks to the hard surface, small stones and other particles cannot easily cause damage to the paintwork. The sealant also protects against chemical products and environmental influences such as road salt, snow and ice, which can damage the paintwork over time.
Regular vehicle maintenance
Regular and careful vehicle maintenance is crucial for the long-term preservation of the ceramic sealant. This includes regularly washing the vehicle with suitable care products, avoiding aggressive cleaning agents and regularly checking the sealant for wear and damage. With the right care, the ceramic sealant can guarantee optimum protection for several years.
Car sealants at a glance
