Our premium concrete & stone sealing effectively and permanently protects surfaces from external influences and clearly counteracts the penetration of oil, fats, coffee and red wine. In addition, the protective clear lacquer coating leaves a color-intensifying, glossy film that visibly enhances the treated surface.
Practice video – effectively protecting stone figures & stone sculptures in the garden from environmental influences
Product features
✓ Effective permanent surface protection against water, dirt and weathering
✓ prevents the growth of mosses, lichens, fungi and other natural influences
✓ 100% solid-containing clear lacquer coating
✓ high abrasion resistance through SiO² nano technology
✓ treated surfaces are not breathable
✓ Color deepening effect with a glossy film / enhancement of the surface
✓ very strong hydrophobicity
✓ Significant reduction in the penetration of oil and fats, coffee, red wine
✓ Frost-resistant (ice and snow do not damage it)
✓ UV stable
✓ Easy-to-clean effect: dirt
✓ Temperature-resistant up to 1,000°C (with short-term exposure)
Scope of delivery:
1 x liter bottle
Highly effective, highly water-repellent, abrasion-resistant nano-coating for all absorbent, mineral surfaces.
Not breathable
Item number: 3008-704
High quality made in Germany
product safety
Information on the classification of the product within the framework of the Ordinance on Hazardous Substances, safety data and data on toxicology and storage can be found in our safety data sheet.
Pay attention to suitable protective equipment when using. When ordering, we recommend wearing suitable respiratory masks and rubber gloves.
In the event of skin contact, wash areas thoroughly with soap and water.
storage
V24 Concrete and Stone Sealing Extreme can be kept for at least 12 months in the original closed container at storage temperatures of +5 to + 25 ° C.
Opened containers should be used at short notice.
A longer storage period does not necessarily mean that the product is unusable, however, in terms of quality assurance, the properties desired for the intended use should be checked.
Application
- V24 concrete and stone sealing extreme is delivered ready-to-use and is applied undiluted to the pre-cleaned and dried surface. A dilution with alcohol is possible depending on the application.
- All surfaces to be treated must be dry and well cleaned, as this is the only way to ensure a deep penetration of the sealant, which has an optimal long-term and deep effect.
- After application, the V24 Concrete and stone sealer extreme must remain in contact with the surface for several seconds as a liquid film.
- The coating is completely crosslinked and cured after 24 hours.
A detailed application description can be found in our data sheet
Protective clear lacquer coating for all mineral, absorbent concrete and stone surfaces, indoors and outdoors.
✓ Concrete (concrete block, concrete pavement, stairs, garage and workshop floors, exposed concrete areas …)
✓ Stone (natural stone, paving stone, granite, sand-lime brick, slate, masonry, driveways …)
Important: Use is limited on highly polished surfaces with low absorbency, as optimal bonding cannot take place here. If necessary, the surface should be roughened in advance (60-100 sandpaper depending on the surface) and a primer layer (1/3 alcohol 2/3 sealant) applied. Then after about 30 minutes the undiluted sealing.
The consumption depends on the absorbency of the surface approx. 10-40m² / liter.
